+44 (0) 1924 367255 sales@oeelectrics.co.uk

QikFit TUF


USB Type-A & Type-C ports
Integrated panel mount clips
Safety & EMC certified

The QikFit TUF25W A+C USB charging module means that QikFit system users do not have to accept second best when it comes to USB charging of their mobile devices.

The provision of a USB Type C charging port with up to 3A output into compatible devices ensures future proofing of your QikFit investment whilst the USB Type A port with up to 2.5A output will satisfy users of older devices.

Both safety and efficiency is guaranteed with QikFit TUF25W  due to its advanced no compromise circuitry incorporating full overload and short circuit protection, plus comprehensive safety and EMC certifications.


Protection from External Surges Yes (3.5kA for 8/20us Pulse)
Internal Over Temp Protection Self Resetting
Internal Over Voltage Protection Self Resetting
Output Over Current Protection Self Limiting
Short Circuit Protection Self Resetting
USB Sockets Intelligent Device Recognition (IDR)
Gold Plated for Improved Contact
Type-A specifically manufactured for minimum 5000 insertions.
Type-C for minimum 10,000 insertions.
Power Indicator Blue LED
Cable Compensation Voltage Adjustable to compensate for cable loss
Standards Certified to IEC 61558.2.16 and


USB Charging Outlets 1 x Type A Female
  1 x Type C Female
Charging Current Type A 5V up to 2.5A
  Type C 5V up to 3.0A
  (Maximum combined output 5A)
Rated Total Output Power 25W
AC Voltage Range 200-240VAC at 50/60Hz
AC Input Current (Full Load) Maximum 0.6A
Efficiency  Up to 90%
Environment 0 – 30C / 85% Relative Humidity
Standby Power  0.05W



1 x Type A & 1 x Type C USB charging sockets
GST18i3 male power in connector


Fascia – V0 Polycarbonate
Back – V0 Polycarbonate


Fascia – Black, or White RAL 9016


  • Apple iPhone/iPad – Yes (including 2.4A)
  • Apple MacBook Laptop – Yes (Type C 3A)
  • Google Pixel Phone + Laptop – Yes (Type C 3A)
  • Android (USB BC1.2) – Yes
  • Samsung Tablet charging – Yes
  • Blackberry – Yes


Designed specifically for panel mounting, QikFit TUF25W has built in mounting clips for tool-less installation in panels up to 3mm thick and an integral GST18i3 male connector for quick connection of a suitable power supply cord.

Quality and Testing:

All QIKFIT TUF25W units are manufactured using ISO9001 quality controlled components and practices and are 100% tested before dispatch.

  • Visual: Configuration and appearance.
  • Power sockets: Continuity, polarity, insulation & earth
  • USB charger: Output voltage and resistance
  • Data & AV: All sockets continuity tested with batch performance testing.

“we test every pin on every connection in every socket”

CE Marking:

All units built with UK and European socket types are CE marked by OE Electrics as complying with:

  • Electromagnetic Compatibility Directive 2014/30/EU
  • Low Voltage Equipment Directive 2014/35/EU
  • RoHS2 Directive 2011/65/EU


Safety – IEC61558-2-16
EMC – EN62104-3:2000, FCC Part (B) Class B
Cable, connectors & mains plug: Independently certified to the appropriate national/international standard.

Unit Dimensions:

Cutout Dimensions:




Cutout Dimensions


Attach the power cable to QikFit TUF and then feed the power cable into the panel, then insert QikFit TUF at an angle as shown

Apply equal pressure across the front of the QikFit TUF until it clicks into place

Alternatively, if rear access is available QikFit TUF can be fitted into the panel first (as above), and then attach the GST18i3 cable.